Exhaust Hood

Canopy Type Hood

> Rectangular Hood

• Ideal for a fixed workspace where the location does not allow fot a capture arm or for a fix robotic installation.
• Custom hoods available according to customuer specification.
• Painted steel, Gavanizaed steel or Stainless steel.
• Possibility for a fluorescent work light to be installed
• These hoods can be connectod to a blower for evacuation or a filtration unit for heating savings.

Blowers

Description Blower is designed for application that the air is filled of dust particles Enclosure constructed of 16ga plate It includes a motor base to provide a good rigidity. Anti-explosive model available The impeller is made of aluminum and of radial blades The blades design are to prevent accumlation of dust and provide a good static pressure Fully sealed electric motor with an external cooling fan (TEFC) with ball bearings

Downdraft Work Table

Description The cover pannels provides a better succion at the work location. Table size can be customized according to customer's request. This table can be connected to a blower for evacuation or a filtration unit for heating savings. The slats are installed for an easy replacement when worn. Slats and their support are not painted to provide a good surface ground when cutting with a plasma. A clip is available to connect the ground for the plasma.

• Dust and cutting debris can be easily removed with drawers, this means that you can clean the inside of the table without removing the slats.

Capture Arm

Description 180° wall mount Aluminum inner structure Joints equipped with springs and brakes for precise positioning of the nozzle Aluminum Duct High temperature flexible duct Nozzle with a handle Available in lengths of 5', 10' and 15' and in 6" and 8" diameter Custom sizes available Ceilling mount available

Extension Arm Steel structure Baked electrostatic blue paint finish Includs the spiro-tube on the extension arm To be installed with a 10' capture arm to provide a reach of 15', 20' et 25'

Cutting Table

Downdraft Dry Table

Updraft Water Table

• The table is divided into several equal sections with doors and a main conduit that suck air down into the table.
• Two doors are always open (the ones closest to the plasma tip).
• The position of the cutting carriage determins the doors to be opened.
• These doors suck the smoke in the main exhaust conduit integraded in the table.
• Once in the conduit, the smoke is directed to a filtration system.

• The plasma jet force the smoke into the water and exit with the majority of its particle removed. But jumping sparks and melted material above the water can produce smoke that can be removed by the updraft system..

• The system consits of a hood that sucks the smke emitted bu the plasma.
• The smoke is drawn into a plenum.
• The plenum is constructed with a trolley on wheels guided on rails with a rubber mat providing an hermetic vacuum.
• The smoke in the ventilation duct is drected towards a filtration unit.